Silvercrest Z30412-IT Operating Instructions And Safety Advices page 191

66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 193 25.05.11 12:21
Note: The overload warning values are
set to 0.00 in the factory.
1. Press the FUNCTION button
peatedly until the basic mode (voltage
display) appears in the LC display
2. Press and hold down the FUNCTION
button 2
3. Press the FUNCTION button
briefly. The MAX LOAD (maximum
load) display appears in the LC
display 1
Note: Press the FUNCTION button
2 briefly twice if you have already
programmed the electricity prices for
tariff 1 and tariff 2.
4. Press the SET button
or WATT display flashes.
5. Press the SELECT button
either the current (AMP) overload
warning or the power consumption
for about 3 seconds.
.
3 . The AMP
2 re-
1 .
2
6 to select
GB/MT 193