Silvercrest Z30412-IT Operating Instructions And Safety Advices page 192

6. Press the SET button
7. Press the SELECT button
8. Repeat steps 6 and 7 to program the
9. Press the SET button
10. Press and hold down the FUNCTION
As soon as an overload warning value
is exceeded, the OVERLOAD WARN-
ING display flashes in the LC display
and the meter emits an audible alarm sig-
nal.
Note: If the overload warning value is set
to AMP, then the LC display
194 GB/MT
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 194 25.05.11 12:21
(WATT) overload warning.
your settings. The first digit flashes.
edly until the desired value appears.
remaining values.
your settings.
button 2 for approx. 3 seconds to
save the entered values.
3 to confirm
6 repeat-
3 to confirm
1
shows the
1