Pioneer MVH-S329BT Owner's Manual page 10

To make a call using a preset number, press one of the number buttons (1/
to 6/ ), then press the M.C. dial, while the phone menu is displayed.
Voice recognition
This function is only available when an Android device equipped with voice
recognition is connected to the unit via Bluetooth.
1
Press and hold and then talk into the microphone to input voice
commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your device.
TIP
When a Pioneer Smart Sync connection is made (page 12), you can also use the voice
recognition function from Pioneer Smart Sync installed on your Android device by pressing
and holding . For details on the voice recognition features, see the application's help
section.
Phone menu
1
Press to display the phone menu.
Menu Item Description
RECENTS Display the missed call history.
[MISSED]
[DIALLED] Display the dialed call history.
[RECEIVED] Display the received call history.
PHONE BOOK Display the contacts in your phone.
PRESET 1-6 Recall the preset phone numbers. You can also recall the
preset phone numbers by pressing one of the number
buttons (1/
A.ANSR* Select [ON] to answer an incoming call automatically.
[ON], [OFF]
10
En
.
to 6/ ).
Menu Item Description
PB INVT Invert the order of names in the phone book (name
view).
DEVICELIST Display the list of paired Bluetooth devices. "*" appears
on the device name when the Bluetooth connection is
established.
When no device is selected in the device list, this
function is not available.
DEL DEVICE Delete the device information.
[DELETE YES],
[DELETE NO]
ADD DEVICE Register a new device.
DEV. INFO Switch the device information on the display between
the device name and Bluetooth device address.
* If two phones are connected, this function does not work on incoming calls that are
received while one of the phones is being used for a call.
Bluetooth audio
Important
• Depending on the Bluetooth audio player connected to this unit, the available operations
will be limited to the following two levels:
– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio
player.
– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback,
pause, select song, etc.
• The sound of the Bluetooth audio player will be muted when the phone is in use.
• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone
automatically.
• Depending on the type of Bluetooth audio player you have connected to this unit,
operation and information displayed may vary based on availability and functionality.
1
Make a Bluetooth connection with the Bluetooth audio player.
2
Press SRC/OFF to select [BT AUDIO] as the source.
3
Press BAND/ to start playback.