Disposal; Troubleshooting; Technical Specifications - Silvercrest SHGB 50 A1 Operating Instructions Manual

8. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

9. Troubleshooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
38 GB
Possible causes /
Fault
• Has the device been
None
connected to the
Function
power supply?
1. Disconnect the mains
plug 1 from the wall
socket.
2. Allow the device to
cool down.
Error messages
3. Connect the mains
on the display
plug 1 with the wall
(E1, E2, E3, E4)
socket and put the de-
vice into operation. If
the device cannot be
switched on, contact
the Service Centre.
10. Technical
specifications
Model: SHGB 50 A1
Mains voltage: 220-240 V ~50/60 Hz
Protection class: II
Power rating: 50 W
Subject to technical modification.
Action