Charging Mobile Devices - Silvercrest 282352 Operation And Safety Notes

The built-in rechargeable battery stores the energy
generated.

Charging mobile devices

ATTENTION! RISK OF PROPERTY DAMAGE!
Note: Please consult the product's instructions for use
for the correct operating voltage of your device before
charging. There is no warranty for damages due to
using the incorrect operating voltage.
Note: The charging process described below reaches
an output voltage / direct current (DC output) of 5 V.
Verify the supply voltage of your mobile device matches
this voltage before use.
Set the ON / OFF switch
turn the product on.
Connect the 0.137 in (3.5 mm) DC plug to the DC
connection jack
Plug the USB A connection cable to your mobile
device (not included) into the USB A port on the
adapter cable
Unfold the crank
3 rotations per second. The battery of the connected
18 US-EN
to the ON position to
5
.
4
.
8
and turn at a speed of 2.5 to
3