Using The Radio - Silvercrest 282352 Operation And Safety Notes

mobile device will be charged using the energy
generated.
Note: When charging by crank , it will take
3
some time before the battery voltage is high
enough for mobile devices; this varies by the
product's battery power.

Using the radio

Set the ON / OFF switch to the ON position to
5
turn the product on.
Push the RADIO button on the control panel
6 f 6
and hold for about 3 seconds to turn the radio on.
Press the SCAN+ or the SCAN button to
6 e 6 b
scan for a station during playback. The radio will
automatically scan for stations and will pause when
a station with an adequately strong signal is found.
Repeat the above process to scan for another sta-
tion. Use the SCAN + button to scan up for
6 e
stations (frequency range of 87.5 MHz to 108
MHz) or use the SCAN– button
to scan down
6 b
for stations (108 MHz to 87.5 MHz).
To adjust the volume while playing the radio, push
the VOL + button to increase the volume or
6 d
the VOL– button to decrease it.
6 c
US-EN 19