Charging Mobile Devices - Silvercrest 282352 Operation And Safety Notes

Charging mobile devices

ATTENTION! RISK OF PROPERTY DAMAGE!
Note: Before the charging process, you should consult
the product's operating manual for the appropriate
operating voltage of your end product. There is no
warranty for damages which arise due to an improper
operating voltage.
Note: During the charging process described below,
a value of 5 V is reached for the output voltage / direct
current (DC output). Ensure before use that the incom-
ing voltage of the mobile device matches this voltage.
Switch the product on by setting the ON / OFF
switch
5
Connect the 3.5 mm-DC plug with the DC connec-
tion socket
Connect via USB A connection to your mobile de-
vice (not included in scope of delivery) with the USB
A connection socket on the adapter cable
Unfold the hand crank
of approx. 2.5 to 3 rotations per second. The bat-
tery of the connected mobile device will be charged
using the energy generated.
to the ON position.
.
4
and wind it at a speed
3
.
8
GB/CY 15