Sony VPL-BW5 Operating Instructions (VPL-BW5) Operating Instructions Manual page 36

Setting items
Brightness
Color
Hue
Sharpness
Gamma
Mode
Color Temp.
DDE
(Dynamic
Detail
Enhancer)
36
Functions
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The
lower the setting, the darker the picture.
You can make adjustments by pressing BRIGHT+/–
on the remote control.
Adjusts the intensity of the color density.
The higher the setting, the greater the intensity. The
lower the setting, the lower the intensity.
Adjusts the color tone.
The higher the setting, the more greenish the picture
becomes. The lower the setting, the more reddish the
picture becomes.
Sharpens the outline of the picture, or reduces the
noise.
The higher the setting, the sharper the picture. The
lower the setting, the softer the picture, thus reducing
the noise.
Adjusts the response characteristics of the tone of
the picture.
Select a favorite tone from three options.
Gamma1: Makes a scene a little brighter.
Gamma2: Makes a scene brighter.
Gamma3: Makes a scene darker.
Off: Gamma Mode is "Off".
Adjusts the color temperature.
High: Gives white colors a blue tint.
Middle: Gives a neutral tint between "High" and
"Low".
Low: Gives white colors a red tint.
According to the film source you have selected,
make a setting for playback.
Off: Plays a video signal in an interlace format
without converting.
Progressive: Converts an interlace format video
signal to a progressive format.
Film: Normally, select this option. Reproduces the 2-
3 Pull-Down film sources with smooth picture
movement. When the video signal with a format
other than the 2-3 Pull-Down is input,
"Progressive" is automatically selected.
Initial setting
50
50
50
30
Off
Set according to
the input signal
Film