Turning Off The Power - Sony VPL ES7 Operating Instructions Manual

7
Adjust the trapezoidal distortion
( ) of the picture. (VPL-EX7/
ES7 only)
Press the KEYSTONE key on the
Remote Commander to display the
adjustment menu and adjust the tilt using
the v/V/b/B keys.
For VPL-EX70
• When you adjust the tilt of the projector
with the adjuster, the V keystone
adjustment is performed at the same
time. If you do not want to perform the
automatic keystone adjustment, set the
"V Keystone" to "Manual." (See
page 36.)
• If you set the "V Keystone" to "Auto,"
the "V Keystone" correction is
automatically adjusted. However, it may
not be perfectly adjusted depending on
the room temperature or the screen
angle. In this case, adjust it manually.
Press the KEYSTONE key to "V
Keystone" displays on the screen, and
adjust the value with the v/V/b/B keys.
8
Adjust the size of the picture and the
focus.
Adjust the picture size using the Zoom
ring and adjust the picture focus using
the Focus ring.
22

Turning Off the Power

Turning Off the
Power
1
Press the ?/1 key.
"POWER OFF? Please press ?/1 key
again." appears to confirm that you want
to turn off the power.
Note
The message disappears if you press any
key other than the ?/1 key, or if you do not
press any key for five seconds.
2
Press the ?/1 key again.
The ?/1 key flashes in green and the fan
continues to run to reduce the internal
heat. Also, the ?/1 key flashes quickly
for the first 60 seconds. During this time,
you will not be able to light up the ?/1
key again with the ?/1 key.
3
Unplug the AC power cord from the
wall outlet after the fan stops running
and the lights in red. (Except
?/1 key
when using the Direct Power On/Off
function or the Off & Go function.)