Sony SRX-T105 Operating Instructions Manual page 37

No. Error messages
33 FPGA CONFIG FAILURE
34 IIC FAILURE
35 LAMP A ALERT
36 LAMP B ALERT
37 LAMP A WARNING
38 LAMP B WARNING
39 DATA LOAD FAILURE
LENS POSITION SENSOR
40 PS FAN FAILURE
41 DVI SIGNAL FAILURE
Meaning
The internal line of the projector does not function properly.
The internal line of the projector does not function properly.
The time used for Lamp A exceeds the recommended time for replacement.
The time used for Lamp B exceeds the recommended time for replacement.
The time used for Lamp A exceeds 80% of the recommended time for replacement.
The time used for Lamp B exceeds 80% of the recommended time for replacement.
Failure of the lens position adjustment to the registered setting.
Trouble with the fan for PS converter, or the harness is disconnected or down.
Inappropriate menu setting for the input signal has been found, or the cable has been
disconnected or is down.
This will only be displayed if this situation happens when LKRI-004 or LKRI-005 is
attached.
37
Error Messages