Service Manual - PHP 1000 Pump
3.1.7
T7 Buzzer malfunction
T7 Fasten or replace with new buzzer
SOP:
1. Assure the voltage supplied is correct.
2. Make sure the lead wires whether is plugged in or loosen.
3. Use an appropriate screwdriver to loosen 2 screws found from the Buzzer.
4. Replace with new according to the part listed from BOM
5. Use an appropriate screwdriver to fasten the 2 screws to fasten the Buzzer.
( referring the top case exploded diagram in section 2.1.2).
2008.04 V1.0
25