Superior VRE3236ZENWS Installation And Operation Instructions Manual page 12

Installing the VRE3200 Series Log Set
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log placement
is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the flames. Follow the log
placement instructions precisely. NOTE: Do not cover the burner ports.
Table 6 - Log Set
I.D.
Description
No.
1 Rear Log
2 Middle Log
3 Right Front Log
4 Front Left Log
5 Top Right Log
6 Middle Twig Log
7 Top Rear Log
8 Top Left Log
1. Place rear log (1) being pilot in-between the tube burner. (Figure 15)
2. Place middle log (2) directly in front of tube burner (Figure 16).
Square Protrusion
Pin for Log 7
for Log 7
Figure 15 - Place Rear Log (1)
3. Place front right log (3) onto grate. The notch on the "charred section" will fit around the grate(Figure 17).
4. Place front left log (4) onto grate. The notch on the "charred section" will fit around the grate (Figure 18).
Figure 17 - Place Front Right Log (3)
12
1
5
2
8
4
1
Round Protrusion
for Log 5
Front View
1
2
3
Top
View
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
6
7
3
Square Protrusion
for Log 8
Figure 16 - Place Middle Log (2)
4
Figure 18 - Place Front Left Log (4)
7
1
8
2
6
4
1
2
Front View
1
2
5
3
Square Protrusion
for Log 5
3
Top
View