Connecting A Satellite Receiver (Sat) - Sony 53S75 Operating Instructions Manual

Note:
• To view scrambled channels through the
cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
** If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
Connecting a satellite receiver
(SAT)
1
Connect the cable from the satellite
antenna to the satellite receiver.
2
Attach the coaxial cable from the incoming
cable connection or antenna to VHF/UHF
on the projection TV.
3
Using AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).
Note:
• To view input from the satellite receiver,
select the video input which the satellite
receiver is connected to by pressing TV/
VIDEO on the remote control.
Disconnect all power sources before making any connections.
(Rear of projection TV)
CONVERTER
IN
VIDEO 1 VIDEO 3
VHF/UHF
OUT
S VIDEO MONITOR AUDIO
(VAR/FIX)
VIDEO Y VIDEO
L
L
P
B
(MONO)
(MONO)
AUDIO AUDIO
P
R R
R
COMPONENT
S VIDEO
AUDIO-L
AUDIO-R
RK-74A (not supplied)
YC-15V/30V (not supplied)
Cable/
Satellite antenna
Antenna
AUX
cable
2 1
TO
SATELLITE IN
AUDIO R AUDIO L VIDEO
LINE OUT
3
SAT
VHF/UHF
S VIDEO IN
OUT
11