Connecting A Satellite Receiver - Sony KP-51WS500 Service Manual

Connecting a Satellite Receiver

Rear of projection TV
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
S
VIDEO
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Using AUDIO and S VIDEO cables, connect the satellite receiver's
AUDIO and S VIDEO OUT jacks to the projection TV's AUDIO and
S VIDEO IN jacks.
3
Connect a coaxial cable from your cable or antenna to the projection
TV's VHF/UHF jack.
✍
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)
Installing and Connecting the Projection TV
Coaxial
cable
Satellite receiver
Satellite
antenna
cable
23