Handle Positions; Height Adjustment - Bissell PowerClean 92L3 Series User Manual

O
perations

Handle positions

Press the handle release pedal, located on the lower
left side of the vacuum, with your foot to place your
vacuum into one of three cleaning positions.
1. Upright – For storage and above floor
cleaning with tools.
2. Normal Cleaning – Press handle release
pedal once. Position used for most
household floor cleaning tasks.
3. Low Cleaning – With the vacuum in normal
cleaning position, press handle release pedal
again. Use for reaching under low furniture
such as tables, chairs or beds.

Height adjustment

The powerfoot/rotating floor brush on your vacuum
can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
1. Turn height adjustment knob to desired setting.
Bare Floor
Lowest Setting
Medium Setting
Highest Setting
w w w . b i s s e l l . c o m
ug110-4054_92L3_608.indd 7 ug110-4054_92L3_608.indd 7
Tip:
Before cleaning under low furniture, check
area first for objects that might harm the unit
or block the vacuum hose.
1.
For non-carpeted,
Height Adjustment Knob
indoor surfaces
For short pile carpets
For short and medium
pile carpets
For plush pile carpet
1.
2.
3.
8 0 0 . 2 3 7 . 7 6 9 1
7
8/8/08 2:36:32 PM 8/8/08 2:36:32 PM