Inserting Batteries Into The Remote Control; Connecting The Aerial And Vcr; Switching On The Projection Tv - Sony KP-41PX1 Instruction Manual

Getting Started - Installation

Inserting Batteries into the Remote Control

Make sure you insert the batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.

Connecting the Aerial and VCR

The Scart lead is optional.
If you use this optional connection it can improve picture and sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the projection TV refer to the "Manually Tuning the TV" section
of this instruction manual, to the tune in the set to the ouput of you VCR. Also refer to your VCR instruction manual to
find out how to find the output channel of your VCR.

Switching on the projection TV

8
Getting Started - Installation
Connect the projection
TV plug to the
mains socket (220-
240V AC, 50Hz).
VCR
or
OUT IN
Push in the
switch on the front of the
projection TV.
On/Off