Reviewing A Test - Auto Test Workshop Pro User Manual

Test Process:
Step Test Status
User hits "START" after providing
1
the examiner id and registration
number of the vehicle
2
Test setup countdown reaches 0
3 Test is prompting user to
'Accelerate Vehicle'
4
Vehicle arrives at desired test speed
5
User begins deceleration
6
Test is prompting user to
'Decelerate Vehicle'
7
Vehicle comes to a complete stop

5.4 Reviewing a test

The test report component of the application contains the information relating to tests
that have been run. The statistics reported include:
• Location (Longitude, Latitude)
• Average/Peak Deceleration (displayable in G, G%, Metres p/ second)
• Duration
• Speed
• Stopping Distance
• MFDD
• Sideshift
Figure 10
Figure 11
AutoTest Workshop Pro User Manual
App Action
Test window begins counting
down from 5
Test window prompts user to
'Accelerate Vehicle'
Test window prompts user to
'Decelerate Vehicle'
Test Report is generated and
displayed on App screen
In order to cycle through the 3
different measurements for Average
/ Peak deceleration you need to
touch the test screen where the
report says 'Average Deceleration'
or 'Peak Deceleration' (Figure 10)
and
measurement unit (Figure 11).
User Action
Make sure the tablet completely
secure/stable and don't bump
it
Confirm the test is prompting
you to accelerate
Begin gently accelerating the
vehicle to desired test speed
Release the accelerator and
apply the brake immediately
Continue to apply the brakes
until the vehicle comes to a
complete stop
Continue to apply the brakes
until the vehicle comes to a
complete stop
Pull over and review test
select the corresponding
Page 13