Sony KL-X9200J Operating Instructions Manual page 6

Stabilizing the monitor
Using the brackets
After setting up, secure the monitor to a wall, etc. with
the supplied brackets.
1
Mount the two supplied brackets with the
screws to the upper rear sides of the
monitor.
2
Pass a strong cord or a chain through each
bracket mounted in step 1, and then secure
it to a wall or a pillar, etc.
6 -GB
Getting Started
For customers in Japan and the U.S.
only
Using the support belts (not supplied)
You can also use the BLT-R10 support belt for the
monitor stand (not supplied) to secure the monitor.
We recommend you use the SU-90 monitor stand with
which the support belts are supplied.
About the SU-90 monitor stand (not supplied)
The dimensions of the stand are 1,050 x 700 x 630 mm
(41
Before you purchase this stand, refer to the dimensions
above and check the size of the area where the stand
will be installed.
Bracket (supplied)
3 / x 27 5 / x 24 7 / inches) (width/height/depth).
8 8 8
Customers in Japan should use the stand SU-90T.
Customers in the U.S. should use the stand SU-90U.
Rear
Front