Operations; Projecting The Picture - Sony KL-X9200J Operating Instructions Manual

Operations

Projecting the
picture
LAMP STANDBY
MUTING
1
If the STANDBY indicator on the front of
the monitor is lit in orange, press 1 /u
(power) on the remote control to turn on
the power.
LAMP
Press the u (power) switch on the monitor if the
STANDBY indicator is not lit.
The green u (power) indicator flashes, then lights
up.
RGB
COMPONENT
VIDEO
RGB COMPONENT VIDEO –VOLUME+
u (power) switch
DISPLAY
VIDEO COMPONENT RGB
MENU ENTER
STANDBY
2
Turn on the power of the connected
equipment.
3
Press RGB, VIDEO or COMPONENT on the
remote control or the monitor to select the
input you want to watch.
The selected input indication is displayed on the
screen.
To watch a computer picture input from the
RGB 1/2 IN connector
Each time you press RGB, the display changes as
follows:
RGB 1 ˜ RGB 2
Remote control
RGB
or
To watch a video picture input from the
VIDEO 1/2/3 IN jacks
Each time your press VIDEO, the display changes
as follows:
VIDEO 1 n VIDEO 2 n VIDEO 3
Remote control
VIDEO
or
To watch a picture of a DVD player input
from the COMPONENT IN jacks
Press COMPONENT.
Remote control
COMPONENT
or
The input signal indication will automatically
disappear.
4
Press VOL +/– (VOLUME +/–) to adjust the
volume.
Remote control
VOL
or
Monitor
RGB
Monitor
VIDEO
Monitor
COMPONENT
Monitor
–VOLUME+
(continued)
15 -GB
Operations
GB