Step 2 Tuning In To Tv Stations; Choose A Language; Display The Menu - Sony KL-37W1 Operating Instructions Manual

Step 2 Tuning in to TV Stations

2
1
1 2 3
4 5 6
7 8 9
0 C
•
PROGR
+ +
•
1
_ _
SAT 1
+
MENU
_
OK
1
VTR 1-2-3 MDP
MEM USE
1
+
PROGR
RESET _
RM-838
2
3
2
To go back to main
menu
Keep pressing .
To go back to the
normal TV picture
Press MENU. Normal
TV picture will be
restored after one
minute if menu functions
are not selected.
Note on the Demo
function
If you choose Demo in
the Installation menu,
you can see a sequential
demonstration of the
menu functions.
Press MENU to stop the
function.
Once you have set up the TV, you can choose the language of the
menu. Then, you should preset the channels (up to 100 channels)
by choosing either the automatic or manual method. The
automatic method is easier if you want to preset all receivable
channels at once. Use the manual method if you only have a few
channels and want to preset channels one by one.
Before you begin
Check that the Full-Function side of the Remote Commander is
visible.
Locate Menu operation buttons on the Remote Commander.
They are shaded in the illustration at the left.

Choose a language

Press on the TV.
The TV will switch on. If the standby indicator on the TV is lit, press
or a number button on the Remote Commander.
Press the MENU button.
The LANGUAGE menu appears. (See Fig. 1.)
MENU
Select the language you want with

Display the menu

Press MENU.
The main menu appears. (See Fig. 2.)
Using + or – select the symbol
Now, choose one of the methods described overleaf:
"Preset Channels Automatically"
or
"Preset Channels Manually"
+ or – and press OK.
and press OK.
LANGUAGE
English
Deutsch
+ Français
Italiano
_
OK
Español
Nederlands
Português
Suomi
Sec
Svenska
¶ Ł غÆ
Türkçe
Select and press OK
Fig. 1
SCREEN MODE
Screen Mode [ zoom ]
Screen Position [ 0 ]
Strobe
PAP [on]
Clip Board [off]
Auto Format [off]
Select and press OK
Fig. 2
7
GB