Preset Channels Manually; Progr - Sony KL-37W1 Operating Instructions Manual

3
Use this method if there
are only a few channels
in your area to preset or if
1
you want to preset
channels one by one.
2
You may also allocate
programme numbers to
various video input
sources.
3
If you have made a
mistake
4
Press to go back to
the previous position.
5
To return to the main
6
menu
Keep pressing .
To go back to the
normal TV picture
Press MENU.
7
-a Select the first element of the "CH" number with + or – or the
To tune in a channel by
frequency -b Select the second element of the number with + or – or the
After selecting F in step 6,
enter three digits using
the number buttons.
-c Press OK
-d Press OK until the cursor appears by the next programme position.
-e Repeat steps 3 to 7 to preset other channels.
7
-a Press OK repeatedly until the colour of the SEARCH position
-b Start searching for the channel with + (up) or – (down).
-c Press OK if you want to store this channel. If not, press + or –
-d Press OK until the cursor appears by the next programme position.
-e Repeat steps 3 to 7 to preset other channels.

Preset channels manually

Select the symbol for "Preset" with + or – and press OK.
The PRESET menu appears. (See Fig. 6.)
Select "Manual Programme Preset" with + or – and press OK.
The MANUAL PROGRAMME PRESET menu appears. (See Fig.
7.)
Using + or –, select the programme position (number button) to
which you want to preset a channel, and press OK.
Select, if necessary the TV broadcast system or a video input
source (EXT)) with + or –.
Then press OK. The CH position will be highlighted. (See Fig. 8.)
Using + or –, select C (to preset a regular channel), S (cable
channel) or F (to tune in by frequency) and press OK.
The first element of the "CH" number will be highlighted.
If you have selected EXT in step 5, select the video input source
with + or –. (See Fig. 9.)
There are two ways to preset channels, If you know the channel
number, go to step "7-Manual,"
or
If you don't know the channel number, go to step "7-Search."
Manual
number buttons and press OK.
The second element of the "CH" number will be highlighted.
number buttons.
The selected number appears. (See Fig. 10.)
The "SEARCH" position is highlighted and the selected channel is
now stored. (See Fig. 11.)
Search
changes.
The CH position changes colour. (See Fig. 12.)
The CH number starts counting up or downwards. When a
channel is found, it stops. (See Fig. 13.)
to continue channel searching.
PRESET
Auto Programme
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
Select and press OK
Fig. 6
MANUAL PROGRAMME PRESET
PROG SYS CH SEARCH LABEL
1 B/G C21 off - - - - -
2 B/G C34 off - - - - -
3 B/G C33 off - - - - -
4 B/G C45 off - - - - -
5 B/G C02 off - - - - -
6 B/G C08 off - - - - -
7 B/G C10 off - - - - -
8 B/G C12 off - - - - -
9 B/G C20 off - - - - -
10 B/G C59 off - - - - -
Select and press OK
Fig. 7
2 B/G C 2 1 off – – – – –
Fig. 8
3 EXT AV1 – – – – –
Fig. 9
2 B/G C 2 1 off – – – – –
Fig. 10
2 B/G C 3 5 off – – – – –
Fig. 11
2 B/G C 3 5 off – – – – –
Fig. 12
2 B/G C 5 0 – – – – –
4$
Fig. 13
9
GB