Quick Function - Hitachi PC-ARF1 Operation Manual

8.8

Quick Function

This function operates for 30 minutes once the
operation starts.
This function is only available when the operation
mode is COOL or HEAT.
The unit will start each time in quick mode until the
setting is canceled.
NOTE:
• Depending on the type and setting of the indoor
unit and outdoor unit it may be impossible to
set this function.
• The "Main/Sub-Remote" is displayed in the
"Current Setting" of the "Help Menu" and
cannot be set if "−−".
• It is possible that the automatic fan speed will
fall to LOW for a maximum of 30 minutes. The
operation will start regardless of the fan speed
setting of the controller when in cooling mode.
(1) Select "Quick Function" from the "Menu" and
press "OK".
The "Quick Function" screen will be
displayed.
Menu
OK
Back/Help
Menu
OK
Back/Help
(2) By pressing " " or "
will change as follows :
OFF ↔ COOL Only ↔ HEAT Only ↔
COOL + HEAT
Select the "Quick" mode and press "OK".
Menu
OK
Back/Help
Menu
OK
Back/Help
20
Menu 15:10(Fri)
Operation Noise Reduction
Quick Function
02
Comfort Setting
/
Sav/reduction Schedule 05
Function 10
Sel. OK Entr Back Rtrn
" the "Quick" mode
Quick Function
Quick
COOL only
Adj. Entr Rtrn
OK Back
(3) The setting confirmation screen will be
displayed. Select "Yes" with "
and press "OK" to confirm the setting. The
screen will return to normal mode.
Menu
OK
Back/Help
Menu
OK
Back/Help
The icon "QUICK" will be displayed when in
"Quick" mode.
" or " "
Quick Function
Set quick function?
Yes No
Sel. OK Entr Back Rtrn
P5417005