Advertisement
INSTRUCTIONS FOR USE:
MASSAGE FUNCTION
1. Plug the adaptor into a 220-240V mains outlet.
2. Connect the adaptor lead to the massager power supply cord.
3. To turn on, press power button once.
4. To activate soothing heat with the massage, press the heat button. Massage heads will glow
red. Allow a few moments for the heating action to warm up.
5. When finished press the power button again to turn off all massage and heat functions and
unplug the pillow.
•
The massage cushion should only be used for a maximum of 15 minutes at any one time.
•
The Shiatsu Pillow is designed for use on the neck, back, shoulders, thighs and calves. Please
note, never sit or stand on it.
•
Only gentle force should be exerted against the pillow in order to eliminate risk of injury.
•
Always remember to switch the appliance off when not in use.
•
Take care to position the product where it will not damage wooden or upholstered surfaces.
•
The elasticated Velcro strap (situated on the rear of the pillow) can be used to secure the pillow
to the chair back.
CAUTION:
TO AVOID PINCHING DO NOT LEAN ON SHIATSU BACK MASSAGE MECHANISM IN THE
PILLOW WHEN ADJUSTING YOUR BODY POSITION. DO NOT JAM OR FORCE ANY PART OF
YOUR BODY IN THE MOVING MASSAGE MECHANISM.
6
MAINTENANCE:
TO STORE
Place the appliance in its box or in a safe, dry, cool place. Avoid contact with sharp edges or
pointed objects which might cut or puncture the fabric surface.
To avoid breakage, DO NOT wrap the power cord around the appliance.
DO NOT hang the unit by the cord.
TO CLEAN
Unplug the appliance and allow to cool before cleaning. Clean only with a soft, slightly damp
sponge.
•
Never allow water or any other liquids to come into contact with the appliance.
•
Do not immerse in any liquid to clean.
•
Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc to clean.
7
Advertisement
