Dynacord DCS 407R Datasheet

Dynacord | DCS 407R
DCS 407R
www.dynacord.com
The module is fitted on the back of the DCS 400 rack
plug-in board. The module is used to switch audio
signals (line levels) or for control purposes regardless
of the DCS 400 system.
Additional properties:
• Configure the audio distributor by separating the wire
jumpers.
• A monitor bus can be connected.
Parts included
No. Component
1 DCS 407R
2 Plug, 15-pin (Phoenix MC 1.5/15-STF-3.81 - 1827839)

Technical specifications

Operating voltage
Operating current
• Standby
• Idle/Announcement/Alert
Electromagnetical environment
Operating temperature
24 V DC, -10%/+30%
24 V, 5.5 mA, 0.14 W
24 V, 42 mA, 1.01 W
E1, E2, E3
-5 °C to 45 °C
▪ 4 low frequency relays, 2 switch contacts each.
▪ Gold-plated double contacts for high level of
contact reliability.
▪ Pluggable connection terminals with screwed flange
for all contacts and coils.
▪ 4 relay control LEDs.
Product dimensions (Width by
Height by Depth)
Net weight
Relay contacts
• Contacts
• Contact material
• Contact load (real)
• Contact current max.
37.5 by 80.6 by 245 mm
163 g
2 SPDT
AgPd + 10μ Au
1 A / 24 V DC
0.5 A / 120 V DC
2 A