Sony UP-970AD Instructions For Use Manual page 20

2
Confirm that "READY" is displayed on the LCD,
and press the jog dial.
The unit enters the menu mode.
When you perform a menu operation for the first
time after you purchase the unit, the top item of the
"AGC" menu is displayed.
If you have performed a menu operation already,
the item that you set last is displayed.
3
Display "DIR" by turning the jog dial up or down.
4
Press the jog dial.
The unit enters the mode in which you can select
the printing direction.
"DI:NOR," which is the factory setting, is
displayed on the LCD. "DI:NOR" is the currently
selected setting.
In this menu operation, you will change the setting
to "DI:REV."
20
Adjustments and Settings Using the Menu
5
Display "DI:REV" in the LCD by turning the jog
dial up or down, and then press the jog dial.
"DI:REV" is registered as the printing direction.
"DIR" reappears on the LCD.
Note
If about 20 seconds elapse without making any
menu operation after you have displayed the menu
item or setting, the display returns to "READY" on
the LCD and the unit exits the menu mode. In such
a case, the setting of "DIR" is not changed.
To cancel the setting
1
Display "BACK" by turning the jog dial in step 5.
2
Press the jog dial.
The display on the LCD returns to "DIR."
To continue menu operations
Make settings by repeating steps 3 to 5.
To end the menu operation
1
Display "BACK" by turning the jog dial after
performing the operation of step 5.
2
Press the jog dial.
The unit exits the menu mode.
Menu lock function
If the message "LOCK" is displayed and you hear the
alarm sound when you press the jog dial, the jog dial is
disabled because the menu operation function is locked.
If you want to perform a menu operation, contact the
nearest authorized dealer.