Sony UP-970AD Instructions For Use Manual page 18

Item Function
QTY To set the print
quantity
SAVE To register up to
three kinds of
settings
SCAN To set the size of
(for the UP- the captured
970AD only) image.
SFT.H To specify the
(UP-990AD) horizontal
position of the
image to be
printed.
SFT.H To specify the
(UP-970AD) position in the
horizontal
direction of the
image to be
printed.
SFT.V To specify the
(UP-990AD) vertical position
of the image to be
printed.
18
Adjustments and Settings Using the Menu
Settings
[QT:1] to QT:10: Prints
from one to ten copies of
the same image.
BACK: Cancels the setting
change and returns to the
item selection column.
SA:3: Registers the menu
settings as No.3.
SA:2: Registers the menu
settings as No.2.
[SA:1]: Registers the menu
settings as No.1.
BACK: Cancels the setting
change and returns to the
item selection column.
SC:WD2: Maximum size
[SC:WD1]: Medium size
SC:NOR: Minimum size
BACK: Cancels the setting
change and returns to the
item selection column.
[S.H:192]: Moves the print
area horizontally relative to
the captured image. The
numeric value displayed by
turning the jog dial depends
on the "SIZE.H" setting
and the signal system.
BACK: Cancels the setting
change and returns to the
item selection column.
[H:0]: Adjusts the
horizontal position. The
numeric value displayed by
turning the jog dial depends
on the signal system of the
image to be captured and
the range setting of images
captured with "SCAN".
BACK: Cancels the setting
change and returns to the
item selection column.
[S.V:20]: NTSC signal
input.
[S.V:28]: PAL signal input.
Adjusts the vertical position
of the printing area relative
to the captured image. The
numeric value displayed by
turning the jog dial depends
on the "SIZE.V" setting
and the signal system.
BACK: Cancels the setting
change and returns to the
item selection column.
Item Function
SFT.V To specify the
(UP-970AD) position in the
vertical direction
of the image to be
printed.
SHARP To adjust the
sharpness of the
printout
c)
SIDE To select the
direction in which
the image is to be
printed
SIZE.H To set the number
(for the UP- of dots in the
990AD only) horizontal
direction of the
printed image.
SIZE.V To set the number
(for the UP- of dots in the
990AD only) vertical direction
of the printed
image.
TRAP To select the
input signal to be
printed
Settings
[V:0]: Adjusts the vertical
position. The numeric value
displayed by turning the jog
dial depends on the signal
system of the image to be
captured and the range
setting of images captured
with "SCAN".
BACK: Cancels the setting
change and returns to the
item selection column.
[SH:0] to SH:14:You can set
the sharpness to any of 15
steps from 0 to 14. A higher
number indicates greater
sharpness. A setting of "0"
indicates that the function is
off, which is also the
default value.
BACK: Cancels the setting
change and returns to the
item selection column.
S:SIDE: Prints the image
rotated by 90 degrees
counterclockwise.
[S:STD]: Prints the image in
the same direction as that
displayed on the monitor.
BACK: Cancels the setting
change and returns to the
item selection column.
[H: 1202]: NTSC signal
input.
[H: 1202]: PAL signal input.
Changing the value
increases or decreases the
number of horizontal dots
to the right of the fixed left
edge of the image.
BACK: Cancels the setting
change and returns to the
item selection column.
[V:480]: NTSC signal input.
[V:574]: PAL signal input.
Adjusts the vertical position
of the bottom edge with
respect to the fixed top edge
of the image.
BACK: Cancels the setting
change and returns to the
item selection column.
TR:ON: Prints the color
signal.
[TR:OFF]: Prints the black
and white signal.
BACK: Cancels the setting
change and returns to the
item selection column.