Advertisement
WIRING
Universal voltage driver permits operation at 120V thru
240V, 50 or 60 Hz.
1. Connect the black fixture lead to the (+) LINE
supply lead.
2. Connect the white fixture lead to the (-) COMMON
supply lead.
3. Connect the GROUND wire from fixture to
supply ground.
LFLED5 Cool
LFLED-IN-0613
LFLED INSTALLATION INSTRUCTIONS
LFLED5 Neutral
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct.
2. Is there voltage at the lamp fixture wires? If there is
no voltage, check all connections.
3. Is the fixture grounded properly?
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool
enough to touch. Do not clean or maintain while
fixture is energized.
1. Clean glass lens & fixture with non-abrasive glass
cleaning solution.
2. Do not open fixture to clean the LED. Do not touch
the LED.
3. Keep leaves and debris out of hood.
LFLED5 Warm
Advertisement
