Usb Audio - Mooer GE300 Owner's Manual

The USB port of GE300 can be connected to your computer and used to record fantastic guitar tones directly to your Digital Audio Workstation (DAW) without the
need of a dedicated audio interface device. You can use your favourite headphones or powered studio monitors connected directly to the GE300 outputs.
The proprietary ASIO driver provides a low latency connection between the GE300 and your DAW with stereo outputs, stereo inputs, and a separate monitor mix
when you are using a WINDOWS system. It is plug and play in MAC, so you do not need an extra drive.
AUDIO MODE – Select between normal and re-amp modes
LEFT OUT / RIGHT OUT : DIRECT – The dry signal directly from the GE300 INPUT
EFFECT – The DSP signal after effects have been added

USB AUDIO

MOOER USB Audio Control Panel
Buffer Settings Volume Info
Status Format
Preferred ASIO Buffer Size
128 samples
Safe Mode
ASIO Status
Current Sample Rate: 44100HZ
Input Latency: 238 samples (5.40ms)
Output Latency: 198 samples (4.49ms)
ASIO active (PCM mode)
Navigate to SYSTEM > USB AUDIO to access the digital I/O
V1.1.0
Audio Mode
Left Out
Right Out
1
100 100
Rec Vol Play Vol
Rotate and press SELECT knob to change top row parameters. Use 1-3 knobs to edit down row parameters.
66
About
USB AUDIO
Normal
Effect
Effect
2 3
50
Direct/Play
Back