Sensor: Network Port And Cabling Requirements - Fidelis Direct/Internal 10G Quick Start Manual

3. Sensor: Network Port and Cabling Requirements

Fidelis Network Sensors are designed to process different traffic capacities and different types of
network connections, including: 1GbE, 10GbE, 1Gb-SX, and 10Gb-SR. Each appliance must be
connected to the various networks with appropriate cables and in some cases, SFP+ transceivers.
The tables below describe the physical connection and cable type associated with each port on the
appliance.
Direct/Internal Appliances With 1GbE rj45/Copper Ports
Admin
Prevent
Monitor-A
Monitor-B
Monitor-C
Monitor-D
ILO
Figure 3: Rear Port Assignments — Sensors rated up to 1Gbps (Direct, Internal, Mail, and Web)
©Fidelis Cybersecurity
8P8C "RJ45" (copper)
8P8C "RJ45" (copper)
8P8C "RJ45" (copper)
8P8C "RJ45" (copper)
8P8C "RJ45" (copper)
8P8C "RJ45" (copper)
8P8C "RJ45" (copper)
Fidelis Network™ Sensor Appliances
Cable Type
Cat 5/5e/6 patch cable
Cat 5/5e/6 patch cable
Cat 5/5e/6 patch cable
Cat 5/5e/6 patch cable
Cat 5/5e/6 patch cable
Cat 5/5e/6 patch cable
Cat 5/5e/6 patch cable
4
QUICK START GUIDE
www.fidelissecurity.com