Setting Up The Position Of The Handlebars/Stem - IDEAL Bikes Trekking Series Original Instruction Manual

Patented seat post with one-screw attachment
Attachment with seat clamps
Suspension seat posts:
14
IDEAL MANUAL 2016_eng.indd 14
Integrated Seatpost
If your bicycle is equipped with a so-called in-
tegrated fixture: or operation and adjustment
please read the enclosed instructions from the
respective manufacturer.
Before you start riding, please test to
see if your seat post and seat are se-
cure. To do this, grab the seat at the
front and back and attempt to turn it. It should
not move.
If your mountain bike is
equipped with a telescop-
ic seat post, please ensure
you read the instructions
provided by the manufactur-
er before use.
Please ensure that you read the part
manufacturer's operating
when setting up and operating sus-
pension seat posts telescopic seat posts.
When adjusting the height of the seat,
never pull the seat post further out
than the maximum extension length
marked! If your tube does not have a max-
imum marking, then you must leave a mini-
mum insertion length of 7.5 cm.

Setting up the position of the handlebars/stem

Various types of stem are used on bicycles:
Threadless stem
manual
Heigh adjustment is possible
* see page 37
6/27/16 11:39