Table of Contents
Advertisement
User Manual
U-SYS IAD208E(M) Integrated Access Device Chapter 3 Updating Software
Figure 3-3 Select the serial port number
4)
Set the parameters of serial port: baud rate as 9600 bit/s (it
must be consistent with that configured on IAD208E(M)
serial port, and the default value is 9600 bit/s), data bit as 8,
1 stop bit, without parity check and flow control. The settings
are shown in Figure 3-4.
Huawei Technologies Proprietary
3-4
Hide quick links:
Advertisement
Table of Contents
