Device - D-Link DSP-W118 User Manual

Section 3 -
mydlink
The Device page contains several options for you to configure your device.
In the device control page, after you have selected the specific device you wish to configure, tap the
the right of the sdevice's name to enter the Device page.
D-Link DSP-W118 User
Manual

Device

1
Device Photo
2
Device Name
1
3
Device Location
4
Wi-Fi
2
3
4
5
Upgrade Time
5
6
Current Firmware
6
7
Version
7
Device ID
8
8
Remove Device
Tap to add a customized photo of this
device.
Tap to change the device's name.
Tap to change or add a new location for
this device.
Tap to change the wireless network this
device will use to connect to the Internet.
Note: The network must be the same as all
your other mydlink™ devices that you wish
to use the same account for.
Tap to enter the firmware upgrade settings.
You can choose the most suitable time for
automatic updates.
Note: It's recommended you enable Auto-
Upgrade to make sure you have the most
up- to-date security updates Over The Air.
This displays the installed version of
the firmware on your device.
Identifies the device for support issues.
Tap this button to disconnect this device
from your mydlink™ account.
button to
10