D-Link DSP-W118 User Manual page 2

Device Information
Status LED
Power/Reset Button
Booting up.
Lost the Wi-Fi connection.
Ready for setup.
Successfully connected to Wi-Fi and switched on.
Firmware is currently being upgraded.
Switched off.
?
Frequently Asked Questions
1) What can I do if my smart plug is not
working properly?
First, reset the smart plug and try setting the smart
plug up again. To reset your smart plug, press and hold
the Power button until the LED turns to solid red.
To make sure your hardware is installed correctly, make
sure that:
• you have an Internet connection on your router
• your router's Wi-Fi is turned on
• your smart plug is on the same Wi-Fi network as
your mobile device during setup
?
Frequently Asked Questions
2) How can I use voice commands to control my
smart plug?
The smart plug will work with both Amazon Alexa and the
Google Assistant.
For step by step instructions on how to pair your smart
plug with either of these services, visit:
support.dlink.ca/DSP-W118
Support
For additional support resources, frequently asked questions and
warranty information, visit:
support.dlink.com (USA) or support.dlink.ca (CAN)
©2019 All rights reserved. D-Link and the D-Link logo are registered trademarks
of D-Link Corporation or its subsidiaries. Product specification, size and shape
are subject to change without notice, and actual product appearance may
differ from that depicted on the package. Visit dlink.ca for more details.
Version 1.00 (CA_EN)_70X110
March 12, 2019
Mini Wi-Fi Smart Plug
Quick Installation Guide
DSP-W118