Bowles Corporation
Storage
The UW-7 must be stored in an upright position on a flat surface that is relatively free
of vibration. The unit should be stored in the carrying bag supplied with the unit. The
storage environment should be free of dust and other foreign particles.
The UW-7 must have the cone removed from the tank and be fully
drained for storage. Permanent damage may result if this is not
done.
The UW-7 should be protected from temperature extremes and high
humidity that can cause condensation within the unit and should be
stored away from corrosive fumes and vapors.
Repackaging and Shipping
When the UW-7 is shipped to Bowles for warranty service or repair, the unit
should be shipped in the original packing and carrying case; other forms of
commercially available packing are not recommended and may void the
warranty.
If the original customized packaging set has been damaged or lost, contact
Bowles for a replacement packaging set.
Repackage the instrument according to the following procedure:
Cone Hanger
Universal Clamp Post
Clamp Support
Clamp Hook
Figure 4-1
UW 7
Calibration Weight
Adapter Pedestal
Calibration Check
Weight
Centering Rings
39