Bowles Corporation
Overall Unit Layout
Rear Water
Splash Guard
Acoustic Sensor
Tank
Overflow Drain
Notch
Clamp
Support Post
The top of the UW-7 Ultrasound wattmeter is shown in Figure 2-1. It includes
the following components.
Front Panel: Includes LCD readout and keyboard.
Rear Panel: Includes Battery compartment, RS-232 Connector and
Sound Tank: To be filled with 420 ml 10 ml of degassed and
Transducer Cone: The cone is removable for safe transporting.
Leveling Bubble: Used to help level the unit before turning it on.
Cone Hanger: Suspends the cone in the sound tank from the load cell
Cone Hanger Mounts: Connect the cone hanger and cone with the
Universal Transducer Clamp Support Post: A removable, vertically
Cone Hanger
Figure 2-1: UW 6 General Layout
Power Transformer Jack.
distilled water for each use.
mounts during readings.
unit's load cell during readings.
mounted bar to which the transducer clamp may be attached.
Cone Hanger Mounts
UW 7
Transducer Cone
Front Panel
Leveling
Bubble
15