Back Panel Description - Bowles UW-7 User Manual

Bowles Corporation

Back Panel Description

The back panel of the UW-7 is shown in Figure 2-3. It includes the following
components:
 Wall Transformer Jack: When using the wall-mounted transformer,
Figure 2-3:
Back Panel
Layout
Drip Shield
RS-232 Port
 RS-232 Port: To connect to a computer or a printer. Only use the
 Drip Shield: A drip shield is also provided to minimize the risk of
simply plug into a receptacle.
special RS-232 cable to USB cable supplied by Bowles Corporation.
water spillage from getting into the electrical connections. However,
care should be exercised to minimize the amount of water spilling
down the rear panel.
UW 7
Clamp Support UW 6
Post
Transformer Jack
15 Vdc only!
17