Wenn Sie nachfolgende Hinweise beachten, sind wir sicher, dass Sie über viele Updates, Support und Jahre Freude an Ihrem Kauf haben werden. Diese Bedienungsanleitung zeigt News zur Marke. Sie Ihnen, wie Sie Ihr neues Produkt von Eurolite installieren, in Betrieb nehmen finden all das und vieles und nutzen. mehr auf unserer Website.
WICHTIGE SICHERHEITSHINWEISE WARNUNG! Lesen Sie aufmerksam die Sicherheitshinweise und benutzen Sie das Produkt nur wie in dieser Anleitung beschrieben, damit es nicht versehentlich zu Verletzungen oder Schäden kommt. Verwendungszweck • Das Produkt eignet sich zur Lichtdekoration im privaten und gewerblichen Bereich. Es ist nicht als Raumbeleuchtung geeignet.
INBETRIEBNAHME Der Lichtschlauch kann auf allen normal entflammbaren Oberflächen mit dem beigefügten Befestigungsmaterial montiert werden. Achten Sie darauf, dass eine ausreichende Wärmezirkulation gegeben ist. Vor Gebrauch Entfernen Sie jegliches Verpackungsmaterial und rollen Sie den Schlauch aus. Montage Befestigen Sie den Schlauch mit den mitgelieferten Kabelbindern oder verwenden Sie die Befestigungsklammern. Schrauben Sie dazu die Klammern mit den mitgelieferten Schrauben auf einem stabilen Untergrund fest und drücken Sie den Schlauch in die Öffnungen der Klammern.
INTRODUCTION Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is Experience Eurolite. your connection to the world of show with an unparalleled variety of products, Product videos, suitable both for professionals and beginners. accessories, firmware and software updates,...
IMPORTANT SAFETY INSTRUCTIONS WARNING! Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage. Intended use • This product is designed for decoration and is suitable for private and commercial use. It is not suitable for household lighting.
SETUP The light tube can be mounted on all normally flammable surfaces with the supplied mounting material. Ensure that sufficient heat circulation is provided. Before use Remove any packing material and unroll the tube. Installation Fasten the tube with the supplied cable ties or use the fastening clips. Screw the clips with the supplied screws onto a stable surface and push the tube into the openings of the clips.
Need help?
Do you have a question about the Rubberlight RL1-230 and is the answer not in the manual?
Questions and answers