Table of Contents
Advertisement
6. Adjust the voltage (vertical) scale to 1.88 volts.
7． Adjust the time (horizontal) scale to about 30 or 40 seconds.
Procedure:
Note: Please read through this procedure first before performing the experiment, as the
elements of the process go fast and require prior knowledge of what is about to happen.
1. Click on the plot restart button – the one with the double arrows in the center of the up,
down, left and right arrows and verify a plot similar to the one shown below. This shows
the fuel cell's voltage being plotted without the motor attached.
Figure 5.2 – Plot with no Motor Load
42
Advertisement
Table of Contents
