Changing Existing Time Phases; Creating New Time Phases; Deleting Time Program - Viessmann OpenTherm VITOTROL 100 OT Operating Instructions For The System User

Changing Existing Time Phases

Press the following keys:
1. Press INFO
2. Press MODE
3. Select "SETTINGS" with <--/-->
4. OK to confirm
5. Select "PROGRAMMING" with <--/-->
6. OK to confirm
7. Select the required program with <--/-->
8. OK to confirm
9. EDIT, "CHANGE" appears
10. OK to confirm, to change the switching time.
Days flash
<--/--> for "CLEAR" and OK, to delete the
switching time

Creating New Time Phases

Press the following keys:
1. Press INFO
2. Press MODE
3. Select "SETTINGS" with <--/-->
4. OK to confirm
5. Select "PROGRAMMING" with <--/-->
6. OK to confirm
7. Select the required program with <--/-->
8. OK to confirm
9. NEW
Days flash
Calling up Switching Times
Press the following keys:
1. Press INFO
2. Press MODE
3. Select "SETTINGS" with <--/-->
4. OK to confirm
5. Select "PROGRAMMING" with <--/-->
Deleting the Time Program
Press the following keys:
1. Press INFO
2. Press MODE
3. Select "SETTINGS" with <--/-->
4. OK to confirm
5. Select "PROGRAMMING" with <--/-->
6. OK to confirm
11. +/- for the required group of days or single
day
12. OK to confirm
13. +/- for the required temperature level (e.g.
Comfort 1)
14. OK to confirm
15. +/- for hour (start time)
16. OK to confirm
17. +/- for minute (start time)
18. OK to confirm
19. OK to change further switching times
ESC to exit programming
10. +/- for the required group of days or single
day
11. OK to confirm
12. +/- for the required temperature level (e.g.
Comfort 1)
14. OK to confirm
15. +/- for hour (start time)
16. OK to confirm
17. +/- for minute (start time)
18. OK to confirm
19. OK to change further switching times
ESC to exit programming
6. OK to confirm
7. Select the required program with <--/-->
8. OK to confirm
9. Press NEXT to call up the set switching
times one after another
10. ESC to exit programming
7. Select the required program with <--/-->
"CLEAR P..."
8. OK to confirm
9. Select "CLEAR PROG" with <--/-->
10. OK to confirm
Confirm appears
11. OK to confirm
12. ESC to exit programming
Commissioning 7