3155/3155i (RM-41), 3152 (RM-61)
Baseband Description and Troubleshooting
Audio Troubleshooting
When troubleshooting the audio, make these common checks (see
• Perform visual inspection of all the ASIPs and the UEMEK.
• Inject 1KHz signal into MiC1 and trace it to the earpiece. Only when using IHF
signal will be amplified by a factor of 8.
DC Block Caps
FM Radio Lines
• Make sure the audio amplifier and solder are ok.
• Make sure the IHF speaker contacts are ok.
• Make sure output is amplified by 8x. If not, check that the gain resistors network
is correct.
©2005 Nokia Corporation
Page 12
Audio ASIPs
Audio ASIPs
Figure 8: UEMEK Side of Audio Diagram
Figure 9: IHF Troubleshooting
Company Confidential
Figure
8):
Earpiece
UHJ
MIC3
MIC2
Pop-Port™
ISSUE 1 07/2005