Using The Radio; Listening To The Radio - Sony D-NF400 Operating Instructions Manual

B Using the radio

Listening to the radio

You can enjoy FM and AM programs.
1
Press RADIO ON/BAND to turn on
the radio.
2
Press RADIO ON/BAND until the
band you want appears.
Each time you press the button, the
display changes as follows:
USA and Canadian models:
FM t AM t TV t WB
B
Other models:
3
Press TUNE + or – to tune in the
station you want and adjust the
volume.
Turning off the radio
Press x•RADIO OFF.
Tuning in the station quickly
Hold down TUNE + or – in step 3 until the
frequency digits begin to change in the
display. The CD player automatically scans
the radio frequencies and stops when it finds
a clear station.
FM t AM
B
Improving broadcast
reception
For FM, extend the headphones/earphones
cord.
Headphones or earphones
For AM, reorient the CD player itself.
Note
Keep the headphones/earphones connected to the
i jack of the CD player. The headphones/
earphones cord works as the FM antenna.
If it is hard to hear the FM/
TV/WB broadcast (for U, CA,
E92, MX2* models)
1 While listening to the radio, press and
hold DISPLAY/MENU until the display
changes.
>AVLS
LOCAL
V v
2 Press
or to select "LOCAL," then
press u/ENTER.
V v
3 Press
or to select "ON," then press
u/ENTER to enter the selection.
* For the area code of the model you purchased,
check the upper left side of the bar code on the
package.
(Continued)
25