Presetting Radio Stations - Sony D-NF400 Operating Instructions Manual

Presetting radio
stations
You can preset up to 51 stations (for USA
and Canadian models) : 7 for TV, 4 for WB,
30 for FM and 10 for AM or 40 stations (for
other models) : 30 for FM and 10 for AM.
1
Press RADIO ON/BAND to turn on
the radio.
2
Press RADIO ON/BAND to select
the band.
3
Press MEMORY for 2 seconds or
more.
The preset number will flash in the
display.
FM 01
87.50 MHz
4
Press DISPLAY/MENU for 2
seconds or more.
The CD player starts scanning the
stations from the lower frequencies and
stops for about 3 seconds when a station
is received.
5
If you want to preset the received
station, press DISPLAY/MENU
while the preset number is
flashing.
The received station is preset on the
preset number 1 and the CD player starts
scanning for the next receivable station.
If you do not press DISPLAY/MENU
within the 3 seconds, the CD player will
start scanning for the next receivable
station without storing the station.
6
Repeat step 5 until all receivable
stations are preset.
If the stations have already been stored,
the newly preset stations will replace the
old ones.
Presetting stations manually
1 Press RADIO ON/BAND to turn on the
radio.
2 Press RADIO ON/BAND to select the
band.
3 Press and hold MEMORY until the preset
number flashes in the display.
FM 01
87.50 MHz
From this step on, start the next operation
within 30 seconds after you finished the
previous operation. If 30 seconds pass
with nothing done, the preset number
stops flashing which shows that the CD
player has exited the preset memory
standby mode. If this happens, start from
step 3 again.
(Continued)
27