RGBlink D4 User Manual page 15

Turn the knob to resolution line and press the knob ">" (arrow )change to "*" (star )
numbers for width, then press the knob to confirm the number.
Put in the numbers for height and frame rate in the same way. For example setting resolution
2560x1152@60, here are the steps:
Note: The number buttons turning green indicate that users can use button to key in numbers.
4. Genlock: users can turn on or off Genlock and set Genlock Format.
Users can turn the knob to choose Genlock Y or Frame lock.
5. Output Adjust: users can turn on HDR adjust here.
HDCP 2.X, UHD, 4K, HDR10, HLG, Dolby Vision, HDMI 2.0, DP 1.2, HDMI 2.1, DP 1.4, 6G SDI, 12G
SDI, H.264, H.265
D4
Customize Format:
*3840x2160@24
Customize Format:
*2560x1152@00
>Genlock
Genlock Format
3840x2160@50
Output 1:
HDMI Mode
Bits
Color Splace
Output HDR
Output 2:
HDMI Mode
Bits
Color Splace
Output HDR
User Manual
Customize Format:
*2560x0000@00
Customize Format:
*2560x1152@60
OFF
HDMI
8Bits
YUV
ON
HDMI
8Bits
YUV
ON
put in the
14