Chapter 2 Installing Your Product; Plugging In Signals; Plugging In Main Power; Turning On Your D4 - RGBlink D4 User Manual

Chapter 2 Installing Your Product

2.1 Plugging in Signals

Connect input signals and output display to the product before all devices are powered on.
Tighten connector screws/locks where provided.

2.2 Plugging in Main Power

Connect IEC cable to device and plug into wall socket. Turn on power at wall socket.

2.3 Turning on Your D4

The device will enter to the boot interface, and OLED display will show as below,
completing initialization before loading last settings and input/output configuration.
HDCP 2.X, UHD, 4K, HDR10, HLG, Dolby Vision, HDMI 2.0, DP 1.2, HDMI 2.1, DP 1.4, 6G SDI, 12G
SDI, H.264, H.265
D4 User Manual
10