Table of Contents
Advertisement
PROBLEM
The water of the
machine is not warming
(the warming indicator
is not lighting up)
The washing pump is
very noisy
The rinsing is
insufficient
CAUSE
The machine has not stopped the
filling of the water
The thermostats (boiler or tank)
are set at a lower temperature
than required
The filter of the input of the pump
is blocked
The washing arms or the sprayers
are blocked
Something has interrupted the
rotation of the cross or the arms
The inlet pressure of the
installation is under 1.5 bar
There is no water supply to the
water input valve
The rinsing sprayers are blocked
Something has interrupted the
rotation of the cross or the arms
SOLUTION
Wait for the filling of the
water to stop. Check that
the overflow pipe is at the
correct position to avoid
constant filling
Increase the themostat
temperature
Unscrew the filter
retaining nut-remove the
filter and wash it with
clean water. Carefully
check for blockages
caused by glass fragments
Unscrew the sprayers or
remove the arms from the
cross and wash them
Remove the basket and
make sure that everything
is at the proper position.
Also check the arms or the
cross if they are broken
down
Check your water supply-
check your water pipe
network. A booster pump
may be fitted.
Check the plumbing
network of your facilities
Unscrew the sprayers or
remove the arms from the
cross and wash them
Remove the basket and
make sure that everything
is at the proper position.
Also check the arms or the
cross if they are broken
down
Hide quick links:
Advertisement
Table of Contents
