Unpacking The Board - Keithley DAS-8 Series User Manual

Unpacking the Board

To prevent any damage to your DAS-8 Series board, perform the
following steps when unpacking the board:
1. Remove the wrapped DAS-8 Series board from its outer shipping
carton.
2. Ensure that your computer is turned OFF but grounded, then hold the
wrapped board in one hand while placing your other hand firmly on a
metal portion of the computer chassis to discharge any static
electricity.
3. Carefully remove the board from its anti-static wrapping material.
(Store the wrapping material for future use.)
4. Inspect the board for signs of damage. If any damage is apparent,
arrange to return the board to the factory; refer to Section 6 for more
information.
5. Check the remaining contents of your package against the packing
list to ensure that your order is complete. Report any missing items to
the factory immediately.
6. Once you have determined that the board is acceptable, you can
configure the board. Refer to the next section for configuration
options.
3-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setup and Installation