Keithley DAS-8 Series User Manual page 21

• MB Series modules and backplanes — MB Series modules are
high-performance, signal-conditioning modules that measure
thermocouple, RTD, strain gage, voltage, and current inputs and are
installed in MB Series backplanes. MB Series backplanes provide
screw terminals for connecting the high-level analog I/O signals.
• ST-SCM8 screw terminal accessory — Allows you to connect a
DAS-8 Series board to up to four MB-02 backplanes; provides screw
terminals that allow you to access the functions of the board; provides
a breadboard area with power for the user-designed circuitry.
• ISO-4 4-channel isolated multiplexer accessory board — Expands
one analog input into four galvanically isolated inputs.
• C-1800 cable — Unshielded, 18-inch cable with a 37-pin connector
on each end; allows you to connect a DAS-8 Series board to an
STA-08, STA-08PGA, EXP-16, EXP-16/A, or EXP-GP.
• S-1800 cable — Shielded, 18-inch cable with a 37-pin connector on
each end; allows you to connect a DAS-8 Series board to an STA-08,
STA-08PGA, EXP-16, EXP-16/A, or EXP-GP.
• C8-MB1 cable — Cable with a 37-pin connector on one end and a
26-pin connector on the other end; allows you to connect a DAS-8
Series board to an MB-01 or MB-02 backplane.
• C-2600 cable — An 18-inch cable with a 26-pin connector at each
end; allows you to connect an STA-SCM8 screw terminal accessory
to an MB-02 backplane.
Refer to the Keithley Data Acquisition Catalog & Reference Guide or
contact your local sales office for information on obtaining these
accessories.
1-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Overview