Setup and Installation
This chapter describes how to install the software in your computer,
unpack and inspect the board, configure the board, and install the board in
your computer. Read this chapter and all related DriverLINX
documentation before you attempt to install and use your DAS-8 Series
board.
Installation Procedure
Installing and configuring DriverLINX for the DAS-8 Series boards
requires four steps:
1. Unpack the Board and Configure the Switches and Jumpers —
Follow the instructions in this chapter to configure the DAS-8 Series
board. See Installing the Board on page 3-25.
2. Install DriverLINX — Follow the instructions given by the
installation program. The Read Me First instructions explain the
components and drivers you can install. See Installing and
Configuring DriverLINX for DAS-8 Series Boards on page 3-21.
3. Configure DriverLINX — See Configuration with DriverLINX on
page 3-25 for configuration options specific to the DAS-8 Series
model.
4. Install your DAS-8 hardware — Read and follow instructions in
section Installing the Board on page 3-25 of this manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
3-1