Rear Of Im3 Gs Deluxe & Ultrasonic Scaler Coolant Outlet - iM3 GS Deluxe START Operating Manual

REAR OF iM3 GS Deluxe START
(1) Ultra Sonic
Coolant Outlet
(2) PET Pressure Coolant
Bottle amber - for CLS
solution
With the coolant bottle pressure switch (F - Page 4) in the "ON" position, the bottle will be
pressurized to 35PSI (approx. 2.5 bar) to supply water/CLS to the 3 way syringe and the High
Speed Handpiece. It must be switched to the off position to release the pressure before re filling
the bottle.
(1) Ultra Sonic Coolant outlet – This will supply pressurized water/CLS to your ultrasonic dental
scaler – A male fitting can be supplied by iM3 for your ultrasonic scaler water line. DO NOT use
any coolant other than distilled water or CLS – any other solution may cause a blockage and will
void your warranty.
(2) Amber coolant bottle for the use of CLS or distilled water in the GS Deluxe.
iM3 Dental Systems
5
Main power supply.
IEC Male power cord is
required.
Power board overload
protector located inside
unit.
Machine maintenance
instructions printed on back
of machine