Preparing The Remote Commander - Sony DPP-SV88 Marketing Operating Instructions Manual

2 Preparing the remote commander

1
Remove the friction seal from the remote commander.
2
Point the remote commander to the remote sensor on the
printer and then press a button to operate the printer.
Replacing batteries
CAUTION:
Replace the battery with Sony CR2025 lithium battery. Use of another
battery may preset a risk of fire or explosion.
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer's instructions.
Friction sea
Remote sensor
Lithium battery
GB
21